Startechcom CONYX ECS0016 Manuel d'utilisateur télécharger pdf (Page 37)

Instruction Manual

of clustered console servers and the connected devices)

Enter the full number of serial ports on the Slave unit in Number of 3.

Ports

Click Apply. This will establish the SSH tunnel between the Master and 4.

the new Slave

The Serial & Network: Cascaded Ports menu displays all of the Slaves

and the port numbers that have been allocated on the Master. If the Mas-

ter console server has 16 ports of its own, then ports 1-16 are preallo-

cated to the Master, so the ﬁrst Slave added will be assigned port number

17 onwards.

Once you have added all the Slave console servers, the Slave serial ports

and the connected devices are conﬁgurable and accessible from the Mas-

ter’s Management Console menu and accessible through the Master’s IP

address. For example:

Select the appropriate • Serial & Network: Serial Port and Edit to

conﬁgure the serial ports on the Slave

Select the appropriate • Serial & Network: Users & Groups to add new

users with access privileges to the Slave serial ports (or to extend

existing users access privileges)

Select the appropriate • Serial & Network: Trusted Networks to specify

network addresses that can access selected Slave serial ports

Select the appropriate • Alerts & Logging: Alerts to conﬁgure Slave

port Connection, State Change or Pattern Match alerts

All such conﬁguration changes made on the Master are propagated out to

all the Slaves; whenever you change any User privileges or edit any serial

port setting on the Master, the updated conﬁguration ﬁles will be sent out

to each Slave in parallel. The Slaves will then make appropriate changes

to their local conﬁgurations (i.e. only make those changes that relate to its

particular serial ports).

Please note:

The Master is in control. You can still change all the settings on any •

Slave serial port (such as alter the baud rates) using the local Slave

Management Console, however these changes will be overwritten the

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 139 140

Pas de commentaire

Startechcom CONYX ECS0016 Manuel d'utilisateur Page 37