Startechcom CONYX ECS0016 Manuel d'utilisateur télécharger pdf (Page 103)

Instruction Manual

IP Conﬁguration - Static

To set static conﬁguration on the LAN interface with the following at-

tributes (denoted in bolded text), you would need to issue the following

commands from the command lines (denoted by italicized text):

Disable DHCP:

#/bin/cong–-set=cong.interfaces.eth0.mode=static

IP Address: 192.168.1.100

#/bin/cong–-set=cong.interfaces.eth0.address=192.168.1.100

Network Mask: 255.255.255.0

#/bin/cong–-set=cong.interfaces.eth0.netmask=255.255.255.0

Default Gateway: 192.168.1.1

#/bin/cong–-set=cong.interfaces.eth0.gateway=192.168.1.1

Primary DNS: 192.168.1.254

#/bin/cong–-set=cong.interfaces.eth0.dns1=192.168.1.254

Secondary DNS: 10.1.0.254

#/bin/cong–-set=cong.interfaces.eth0.dns2=10.1.0.254



1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 139 140

Pas de commentaire

Startechcom CONYX ECS0016 Manuel d'utilisateur Page 103