Startechcom SAT2IDEADP Manuel d'utilisateur

Manual Revision: 02/03/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading soluti

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsIntroduction ... 1Packagi

Instruction Manual1IntroductionThe SAT2IDEADP SATA to IDE hard drive adapter enables you to use your 2.5-inch/3.5-inch IDE-based (PATA) hard drives in

Instruction Manual2SATA Power connectorSATA Data connector

Instruction Manual33.5” Hard Drive Mounting Points2.5” Hard Drive Mounting PointsInstallation3.5in Hard Drive Setup1. If connecting a 3.5in (40-pin)

Instruction Manual43. Connect the ribbon cable and power cable to the connectors on the IDE hard drive.4. Place the IDE drive onto the back plate of

Instruction Manual52.5in Hard Drive Setup1. If connecting a 2.5in (44-pin) IDE hard drive, connect the 40-pin to 44-pin IDE ribbon cable to the 40-pi

Instruction Manual6SpecicationsHost Interface SATA revision 1.0Connectors1 x 40-pin IDE male1 x SP4 Power maleCompatible Hard Drives2.5in and 3.5in P